Description
1 Application
Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.
Freeze protection
Anti-condensation
Temperature maintenance
2 Features and Advantages
Self-limiting heating elements
Small dimensions
No moving parts, no maintenance required, therefore long lifetime
Suitable for T4 and T3 classifications
Can be used for 110/240 VAC/DC
3 Remarks
All Cameo Heaters are designed around self-limiting heating elements. These self-limiting semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.
Optional body #5 : 4 holes diam. 5,2 mm. available in Aluminium and SS range
For easy mounting, at no extra charge
Alternative 316 Stainless Steel heaters can be delivered for the 100-10 Watt range.
Also possible is an aluminium body with four holes drilled through (body #5), for easy mounting.
Please see below for further technical data.
4 Range
LP-1A T3 ca. 115 °C Surface temperature 100-10 Watt
LP-2A T4 ca. 105 °C Surface temperature 100-10 Watt
LP-3A T4 ca. 90 °C Surface temperature 100-10 Watt
LP-4A T4 ca. 70 °C Surface temperature 100-10 Watt
LP-0AHP (High Power model) T3 ca. 130 °C Surface temperature 200-20 Watt
* these temperatures are measured at 20 °C ambient temperature.
5 Technical data
Power 100-10 Watt or 200-20 Watt for High Power model
Electrical cable 3 x 1 sqmm, braided std.
Material cable braided silicone, optional: non-braided cable
Standard length ca. 1 mtr. Other lengths optional
Overall dimensions 78 x 30 x 34 mm (LxWxH)
Weight Aluminium heater ca. 350 g., 316 Stainless Steel 360 g.
Material black anodized aluminium (A) or 316 stainless steel (S)
Protection class II 2G Ex d IIC T4 or T3II 2D Ex tD A21 IP66 T 135°C or T200 °C
Certification KEMA 01ATEX2124X and IECEx DEK 11.0017
IP degree IP 66
Voltage 110/240 VAC/DC
Ambient temp. range – 60 °C … + 90 °C
Optional body #5 4 holes diam. 5,2 mm. available in Aluminium range.
for easy mounting, at no extra charge.
Additional Technical data for the High Power model LP-0AHP, T3, 130 °C:
Overall dimensions 88x36x36 mm (LxWxH)
Material black anodized aluminium only
All other data the same as standard model
1 Application
Direct-heaters for Hazardous locations, designed for direct mounting onto e.g. manifolds etc.
Freeze protection
Anti-condensation
Temperature maintenance
2 Features and Advantages
Self-limiting heating elements
Small dimensions
No moving parts, no maintenance required, therefore long lifetime
Suitable for T4 and T3 classifications
Can be used for 110/240 VAC/DC
3 Remarks
All Cameo Heaters are designed around self-limiting heating elements. These self-limiting semi-conductor elements are saving power consumption. Our Cameo Direct-heaters are designed to heat the installed equipment. If properly selected for freeze protection, no thermostat will be needed.
Optional body #5 : 4 holes diam. 5,2 mm. available in Aluminium and SS range
For easy mounting, at no extra charge
Alternative 316 Stainless Steel heaters can be delivered for the 100-10 Watt range.
Also possible is an aluminium body with four holes drilled through (body #5), for easy mounting.
Please see below for further technical data.
4 Range
LP-1A T3 ca. 115 °C Surface temperature 100-10 Watt
LP-2A T4 ca. 105 °C Surface temperature 100-10 Watt
LP-3A T4 ca. 90 °C Surface temperature 100-10 Watt
LP-4A T4 ca. 70 °C Surface temperature 100-10 Watt
LP-0AHP (High Power model) T3 ca. 130 °C Surface temperature 200-20 Watt
* these temperatures are measured at 20 °C ambient temperature.
5 Technical data
Power 100-10 Watt or 200-20 Watt for High Power model
Electrical cable 3 x 1 sqmm, braided std.
Material cable braided silicone, optional: non-braided cable
Standard length ca. 1 mtr. Other lengths optional
Overall dimensions 78 x 30 x 34 mm (LxWxH)
Weight Aluminium heater ca. 350 g., 316 Stainless Steel 360 g.
Material black anodized aluminium (A) or 316 stainless steel (S)
Protection class II 2G Ex d IIC T4 or T3II 2D Ex tD A21 IP66 T 135°C or T200 °C
Certification KEMA 01ATEX2124X and IECEx DEK 11.0017
IP degree IP 66
Voltage 110/240 VAC/DC
Ambient temp. range – 60 °C … + 90 °C
Optional body #5 4 holes diam. 5,2 mm. available in Aluminium range.
for easy mounting, at no extra charge.
Additional Technical data for the High Power model LP-0AHP, T3, 130 °C:
Overall dimensions 88x36x36 mm (LxWxH)
Material black anodized aluminium only
All other data the same as standard model
